4PCS 40700-3AN0A Tire Pressure Monitor Sensor TPMS For Nissan Frontier SENTRA

Description

4PCS 40700-3AN0A Tire Pressure Monitor Sensor TPMS For Nissan
Note1:
The compatibility we provide is acurate although may not guarantee 100%. We strongly recomend to match parts with yours. if you can't confirm fit 100% , Pls Send us your VIN or part number(s) .
Note2:
【No sensor programming Required】
: The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Installation of TPMS is recommended to be performed only by trained professionals.
Simplified Relearn : OBDII required .
You need use OBDII tool , will need fill in relearn.ID．And the
relearn.ID
in part,pls check.
SPECIFICATION :
Manufacture Part Number ：
40700-3AN0A
Operating Frequency:
315MHz
PACKAGE CONTENT :
4PCS TPMS SENSOR
COMPREHENSIVE VEHICLE COVERAGE
Nissan FRONTIER(from 2017-01 to 2024-06)
WITHOUT IKEY
Nissan MAXIMA(from 2013-01 to 2015-06)
WITHOUT IKEY
Nissan MAXIMA(from 2015-05 to 2015-12)
WITHOUT IKEY
Nissan NV200(from 2017-01 to 2020-02)
WITHOUT IKEY
Nissan SENTRA(from 2012-09 to 2017-12)
WITHOUT IKEY
Nissan VERSA(from 2013-01 to 2017-12)
WITHOUT IKEY
Nissan VERSA NOTE(from 2013-06 to 2020-07)
WITHOUT IKEY
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.