TPMS Tire Pressure Sensor For Toyota Sienna Tundra Sequoia 42607-0C070 OEM

Description

Specification
-We have rigorously tested before delivery and every tire pressure can work normally.
-Long-way transport or irresistible factor may cause damaged on theway, which is powerless to control.
-We recommend that before you go to the store for installation, let the store scan for tire sensor to confirm whether the tire pressure can be scanned.
-If the scan result show tire is not normal, please don't install it to avoid wasting installation costs. Then please contact us in time.
When you receive the tire pressure sensor you need :
Please choose your vehicle’s details for Specific Results in our listing before purchasing.
1-
This sensor does not require programming but it needs to do OBD learning.
2-
Installed sensors:
We have test all the sensors before ship,but because long-way transport or irresistible factor may cause damaged on the way,
in order to avoid the inconvenience and unnecessary and installation fee，so we recommend you to test again with
TPMS Diagnostic Tool
at professional repair shop before install,
If the sensor doesn't work ,pls contact us ASAP, thanks for your cooperation in advance.
installation process
：
(1)
properly installed tire pressure sensor
(2)
according to the tire sign (usually located ON the door frame), for all the tires inflated to the nominal value
(3)
from the beginning of the left front wheel, using the TPMS tools, according to the left front, right front and right rear, left after and full-size spare tire (if any) in the order to activate each sensor
(4)
turn the ignition switch to the ON position
(5)
connect the TPMS tools to OBD interface, use the OBD learning function to sensor ID
(The ID here is the read ID, not the ID on the shell)
(6)
turn off and turn on the ignition switch
(7)
test the road at a speed higher than 30
mph for at least 1
5
minutes to ensure the tire pressure system is working properly (tire pressure lamp is off)
3
.If it doesn't work, you should use OBD Tool for "re-learn".
4
.Failure to install and activate sensor will cause tire pressure monitor light to remain on. It may be caused by broke down of body control module or tire rotation. Please use OBD Tools to“
Re-learn
” it several times.
5
.Any problems, please don’t hesitate to contact us first. We will try our best to do for you!
Condition：
New
Warranty:
2 Years
Replacing OE#:
42607-0C070
Brand New & High Quality
OEM TPMS Tire Pressure Sensor For Toyota Sienna Tundra Sequoia 42607-0C070
Fitment :
2006-2017
TOYOTA
SIENNA
2006-2017
TOYOTA
SEQUOIA
2006-2017
TOYOTA
TUNDRA
Note:
Professional installation in highly recommended (No instruction included)
If you have any questions or concerns, please contact us using the EBAY messaging system
Package:
1PCS OEM TPMS Tire Pressure Sensor Monitoring as pictured
Installation Instruction NOT included